Aeg-Electrolux L14950A User Manual download pdf (Page 14)

Cancelling the delayed start

• Set the washing machine to PAUSE by pressing the button 7;

• Press button 8until the symbol

’ is displayed;

• Press the button 7 again to start the programme.

The selected delay can be changed only after selecting the washing programme again.

The Delay Start can not be selected with the draining programme.

Altering an option or a running programme

It is possible to change some options before the programme carries it out. Before you make

any change, you must press the button 7 to pause the appliance.

Changing a running programme is possible only by resetting it.

Turn the programme dial to

and then to the new programme position.

Press the 7 button again to start the new programme. The washing water in the tub will

not emptied out.

Interrupting a programme

Press the button 7 to interrupt a programme which is running, the corresponding light

starts blinking. Press the button again to restart the programme.

Cancelling a programme

Turn the selector dial to to cancel a programme which is running. Now you can select a

new programme.

Opening the door after the programme has started

When the machine is working and through the delay time, the door is locked. If, for any

reason, it is necessary to open it, set firstly the machine to pause by pressing the button 7.

• If the DOOR symbol disappears from the display, the door can be opened.

• If the DOOR symbol stays on, and the door remains locked, this means that the machine

is already heating or that the water level is too high. In this case the door can not be

opened.

If you cannot open the door but you need to open it you have to switch the machine off by

turning the selector dial to

. After a few minutes the door can be opened (pay atten-

tion to the water level and temperature !).

After closing the door, it is necessary to select the programme and options again and to

press button 7.

At the end of the programme

The machine stops automatically. The pilot light of button 7 goes off and a blinking

appears on the display. The acoustic signal sounds for a few minutes.

If you have chosen a programme or an option that ends with water left in the tub.

Before you empty out the water, the drum continues to run at regular intervals until the

water draining.

Follow the below instruction to empty the water out:

•

turn the programme selector dial to

• select the draining or spinning programme

14 Daily use

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Comments to this Manuals

No comments

Aeg-Electrolux L14950A User Manual Page 14

Comments to this Manuals

Related products and manuals for Washing machines Aeg-Electrolux L14950A