Aeg-Electrolux L14950A User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
The detergent and any additives must be placed in the appropriate compartments of the
dispenser drawer before starting the wash programme.
If using liquid detergents, a programme without prewash must be selected.
Your appliance incorporates a re-circulation system which allows an optimal use of the
concentrated detergent.
Follow the product manufacturer’s recommendations on quantities to use and do not
exceed the «MAX» mark in the detergent dispenser drawer .
Garment labels
For drying, follow the indications given on the manufacturer’s labels:
= May be tumble dried
= Drying at high temperature
= Drying at reduced temperature
= Do not tumble dry.
Drying cycle duration
The drying time may vary depending on:
speed of the final spin
dryness degree required (iron dry, store dry)
type of laundry
weight of the load size .
The average drying time for a timed drying are indicated in the «Drying programmes»
chapter. The experience will help you to dry your laundry in a more suitable way, according
to the different fabrics. Take note of the duration drying time of the already performed
cycles.
Additional drying
If the laundry is still damp at the end of the drying programme, select a short drying cycle
again.
WARNING!
Do not over dry the laundry in order to avoid creasing of fabrics or garment’s
shrinking.
Care and cleaning
You must DISCONNECT the appliance from the electricity supply, before you can carry out
any cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good idea to periodically use a water
softening powder in the machine. Do this separately from any laundry washing, and ac-
cording to the softening powder manufacturer's instructions. This will help to prevent the
formation of lime deposits.
24
Care and cleaning
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

Comments to this Manuals

No comments