Aeg-Electrolux L14950A User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
Problem Possible cause/Solution
The machine does not fill:
The water tap is closed.
Open the water tap.
The inlet hose is squashed or kinked.
Check the inlet hose connection.
The filter in the inlet hose or the inlet valve fil-
ter are blocked.
Clean the water inlet filters. (See "Cleaning
the water inlet filters" for more details)
The door is not properly closed.
Close the door firmly.
The machine fills then empties immediately:
The end of the drain hose is too low.
Refer to relevant paragraph in «Water drain-
age» section.
The machine does not empty and/or does not
spin:
The drain hose is squashed or kinked.
Check the drain hose connection.
The drain filter is clogged.
Clean the drain filter.
An option or a programme that ends with the
water still in the tub or a that eliminates all the
spinning phases has been selected.
Select the draining or the spinning pro-
gramme.
The laundry is not evenly distributed in the
drum.
Redistribute the laundry.
There is water on the floor:
Too much detergent or unsuitable detergent
(creates too much foam) has been used.
Reduce the detergent quantity or use anoth-
er one.
Check whether there are any leaks from one of
the inlet hose fittings. It is not always easy to
see this as the water runs down the hose; check
to see if it is damp.
Check the water inlet hose connection.
The drain or the inlet hose is damaged.
Replace it with a new one.
The cap on the emergency emptying hose has
not been replaced or the filter has not been
properly screwed in after cleaning action.
Refit the cap on the emergency emptying
hose or screw the filter fully in.
What to do if… 31
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 87 88

Comments to this Manuals

No comments