Aeg-Electrolux L14950A User Manual download pdf (Page 32)

Problem Possible cause/Solution

Unsatisfactory washing results:

Too little detergent or unsuitable detergent has

been used.

• Increase the detergent quantity or use an-

other one.

Stubborn stains have not been treated prior to

washing.

• Use commercial products to treat the stub-

born stains.

The correct temperature was not selected.

• Check if you have selected the correct tem-

perature.

Excessive laundry load.

• Reduce the laundry load.

The door will not open:

The programme is still running.

• Wait the end of washing cycle.

The door lock has not been released.

• Wait until the symbol 9.4 has gone off.

There is water in the drum.

• Select drain or spin programme to empty out

the water.

The machine vibrates or is noisy:

The transit bolts and packing have not been re-

moved.

• Check the correct installation of the appli-

ance.

The support feet have not been adjusted

• Check the correct levelling of the appliance.

The laundry is not evenly distributed in the

drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

Spinning starts late or the machine does not

spin:

The electronic unbalance detection device has

cut in because the laundry is not evenly distrib-

uted in the drum. The laundry is redistributed

by reverse rotation of the drum. This may hap-

pen several times before the unbalance disap-

pears and normal spinning can resume. If, after

some minutes, the laundry is still not evenly

distributed in the drum, the machine will not

spin.

• The laundry load is perhaps to little, add

more items, redistribute the load manually

and then select the spinning programme.

32 What to do if…

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 87 88

Comments to this Manuals

No comments