Problem Possible cause/Solution
Spinning starts late or the machine does
not spin:
The electronic unbalance detection device has
cut in because the laundry is not evenly distrib-
uted in the drum. The laundry is redistributed
by reverse rotation of the drum. This may hap-
pen several times before the unbalance disap-
pears and normal spinning can resume. If, af-
ter some minutes, the laundry is still not even-
ly distributed in the drum, the machine will
not spin.
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load man-
ually and then select the spinning pro-
gramme.
The machine makes an unusual noise:
The machine is fitted with a type of motor
which makes an unusual noise compared with
other traditional motors. This new motor en-
sures a softer start and more even distribution
of the laundry in the drum when spinning, as
well as increased stability of the machine.
No water is visible in the drum:
Machines based on modern technology oper-
ate very economically using very little water
without affecting performance.
The display shows the alarm code :
Anti-flooding system has activated.
• Pull out the plug from the power socket,
close the water tap and contact the Service
Force Centre.
If you are unable to identify or solve the prob-
lem, contact our service centre. Before telephon-
ing, make a note of the model, serial number
and purchase date of your machine: the Service
Centre will require this information.
TECHNICAL DATA
Dimensions Width
Height
Depth
60 cm
82 cm
63 cm
Technical data
31
Comments to this Manuals