Aeg-Electrolux F40860 User Manual download pdf (Page 12)

Water hardness Adjusting the water hardness

setting

Use of salt

°dH °TH mmol/l manually electronically

19 - 22 33 - 39 3,3 - 3,9 2 level 5 yes

15 - 18 26 - 32 2,61 - 3,2 1 level 4 yes

11 - 14 19 - 25 1,9 - 2,5 1 level 3 yes

4 - 10 7 - 18 0,71 - 1,8 1 level 2 yes

< 4 < 7 < 0,7 1 level 1 no

The water softener must be set in both ways: manually, using the water hardness

dial and electronically.

Setting manually

The dishwasher is factory set at position 2.

1. Open the dishwasher door.

2. Remove the lower basket from the

dishwasher.

3. Turn the water hardness dial to posi-

tion 1 or 2 (see table).

4. Replace the lower basket.

Setting electronically

The dishwasher is factory set at level 5.

1. Press the On/Off button. The dishwasher must be in setting mode.

Press simultaneously and keep pressed buttons B and C, until the lights of

buttons A, B and C start flashing.

Press button A, the lights of buttons B and C turn off while the light of button

A goes on flashing. In the digital display is visible the current level.

Examples:

displayed = level 5

displayed = level 10

Set the water softener

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

No comments

Aeg-Electrolux F40860 User Manual Page 12