Aeg-Electrolux FAV44080VI User Manual download pdf (Page 25)

What to do if...

Remedying small malfunctions

If the acoustic signal is activated, warning tones sound if there are

faults.

If while the appliance is operating indicators on the control panel flash

or are lit up as described in the following table, please consult this to

find out how to remedy the fault.

After remedying the fault that is flashing in the first or second

rhythm in the programme progress display, press the button for the

dishwashing cycle that had already started. The cycle will continue.

In the case of other fault messages:

– Cancel the dishwashing cycle.

– Switch the appliance off and on again.

– Select dishwashing cycle.

If the fault is displayed again, please contact the Service Force Centre

and inform them of the fault message.

Malfunction Possible cause Remedy

1 short warning tone,

continuously repeated,

can be heard,

the programme display for

the selected wash pro-

gramme is flashing:

the indicator for the end

of the wash programme is

flashing once

continuously .

(problems with water in-

flow).

Tap is blocked with limes-

cale or is faulty.

Check the tap and have it

repaired, if necessary.

The tap is turned off. Turn on the tap.

The filter (where present) in

the threaded hose fitting

on the tap is blocked.

Clean the filter in the

threaded hose fitting.

Filters in the base of the

washing compartment are

blocked.

Cancel the dishwashing cy-

cle (see chapter: Starting a

dishwashing cycle),

clean filters (see chapter:

Cleaning the filters),

then start the dishwashing

cycle again.

Water inflow hose has not

been correctly positioned.

Check the position of the

hose.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Comments to this Manuals

No comments

Aeg-Electrolux FAV44080VI User Manual Page 25

Comments to this Manuals

Related products and manuals for Dishwashers Aeg-Electrolux FAV44080VI