Aeg-Electrolux FPOWER User Manual download pdf (Page 11)

First use

Before using your dishwasher for the first time:

• Ensure that the electrical and water connections comply with the installation

instructions

• Remove all packaging from inside the appliance

• Set the water softener

• Pour 1 litre of water inside the salt container and then fill with dishwasher salt

• Fill the rinse aid dispenser

If you want to use combi detergent tablets such as: "3 in 1", "4 in 1", "5 in 1" etc...

set the Multi-tab function (see "Multi-tab function").

Set the water softener

The dishwasher is equipped with a water softener designed to remove minerals and

salts from the water supply, which would have a detrimental or adverse effect on

the operation of the appliance.

The higher the content of these minerals and salts, the harder your water is. Water

hardness is measured in equivalent scales, German degrees (°dH), French degrees

(°TH) and mmol/l (millimol per litre - international unit for the hardness of water).

The softener should be adjusted according to the hardness of the water in your

area. Your local Water Authority can advise you on the hardness of the water in

your area.

The water softener must be set in both ways: manually, using the water hardness

dial and electronically.

Water hardness Adjusting the water hardness

setting

Use of salt

°dH °TH mmol/l manually electronically

51 - 70 91 - 125 9,1 - 12,5 2 level 10 yes

43 - 50 76 - 90 7,6 - 8,9 2 level 9 yes

37 - 42 65 - 75 6,5 - 7,5 2 level 8 yes

29 - 36 51 - 64 5,1 - 6,4 2 level 7 yes

23 - 28 40 - 50 4,0 - 5,0 2 level 6 yes

First use

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

No comments

Aeg-Electrolux FPOWER User Manual Page 11