Aeg-Electrolux L12843VIT User Manual download pdf (Page 37)

4. Unscrew and remove the two large rear

bolts B and the six smaller bolts C. Re-

move the bracket D.

5. Tighten up the six smaller bolts C. Slide

out the relevant plastic spacer E.

6. Fill the smaller upper hole and the two

large ones with the corresponding plastic

plug caps supplied in the bag containing

the instruction booklet.

7. Connect the water inlet hose as described

under the paragraph «Water inlet».

All the different plug caps are supplied with

the appliance in the plastic bag containing

the instruction booklet.

Positioning and levelling

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by carpets, rugs etc.

Before placing it on small tiles, apply a rubber coating.

Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or

similar materials under the machine.

Installation 37

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

No comments

Aeg-Electrolux L12843VIT User Manual Page 37