Aeg-Electrolux L12843VIT User Manual download pdf (Page 14)

You must select this option after you have set the programme and before you press the

button 8.

The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1

hour up to a maximum of 20 hours by means of this button.

The door will be locked throughout the delay time. If you wish to add laundry in the ma-

chine during the delay time you will press button 8 to put the machine in pause. Add the

laundry, close the door and press button 8 again.

Selecting the delayed start.

• Select the programme and the required options.

• Select the delay start.

• Press button 8: the appliance starts its hourly countdown. The programme will start after

the selected delay has expired.

Cancelling the delayed start

• Set the washing machine to PAUSE by pressing the button 8;

• Press button 9 once until the symbol

’ is displayed;

• Press the button 8 again to start the programme.

The selected delay can be changed only after selecting the washing programme again.

The Delay Start can not be selected with DRAIN programme.

Altering an option or a running programme

It is possible to change some options before the programme carries it out. Before you make

any change, you must pause the washing machine by pressing the button 8.

Changing a running programme is possible only by resetting it. Turn the programme selec-

tor dial to

and then to the new programme position. Start the new programme by

pressing the 8 button again. The washing water in the tub will not emptied out.

Interrupting a programme

Press the button 8 to interrupt a programme which is running, the corresponding light

starts blinking. Press the button again to restart the programme.

Cancelling a programme

Turn the selector dial to to cancel a programme which is running. Now you can select a

new programme.

Opening the door after the programme has started

When the machine is working and through the delay time, the door is locked. If, for any

reason, it is necessary to open it, set firstly the machine to pause by pressing the button 8.

If the symbol 10.3 after a few minutes goes off, the door can be opened.

If the symbol 10.3 stays on and the door remains locked, this means that the machine is

already heating or that the water level is too high. In this case the door can not be opened.

If you cannot open the door but you need to open it you have to switch the machine off by

turning the selector dial to

. After a few minutes the door can be opened (pay attention

to the water level and temperature !).

14 Daily use

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Comments to this Manuals

No comments

Aeg-Electrolux L12843VIT User Manual Page 14

Comments to this Manuals

Related products and manuals for Washing machines Aeg-Electrolux L12843VIT