Aeg-Electrolux L72850A User Manual download pdf (Page 25)

8. Put the cap back on the emergency emp-

tying hose and place the latter back in

its seat.

9. Screw the pump fully in.

10. Close the pump door.

WARNING!

When the appliance is in use and depending on the programme selected there can be hot

water in the pump. Never remove the pump cover during a wash cycle, always wait until

the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is

securely retightened so as to stop leaks and young children being able to remove it.

Cleaning the water inlet filter

If you notice that the machine is taking longer to

fill, check that the filter in the water inlet hose is

not blocked.

1. Turn off the water tap.

2. Unscrew the hose from the tap.

3. Clean the filter in the hose with a stiff brush.

4. Screw the hose back onto the tap.

Frost precautions

If the machine is installed in a place where the temperature could drop below 0°C, proceed

as follows:

1. close the water tap and unscrew the water inlet hose from the tap;

2. place the end of the emergency emptying hose and that of the inlet hose in a bowl

placed on the floor and let water drain out;

3. screw the water inlet hose back on and reposition the emergency emptying hose after

having put the cap on again.

Care and cleaning

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

No comments

Aeg-Electrolux L72850A User Manual Page 25