Aeg-Electrolux LAV74810 User Manual download pdf (Page 29)

• If the location in which the appliance is to be installed is fitted with

small-format tiles, put a rubber mat (available in the shops) under

the appliance.

If the appliance is to stand on a

base:

In order for the appliance to be se-

cure on the base, fixing plates*)

must be mounted, into which the

appliance is inserted.

If the appliance is to stand on a floor which moves, e.g. a suspend-

ed wooden floor:

Place the appliance in an area as close as possible to a corner of the

room.

Screw a water-resistant wooden board (at least 15 mm thick) onto at

least 2 of the floor joists.

Making the appliance level

The four feet of the appliance are

pre-adjusted.

Large degrees of unevenness can be

compensated for by individually ad-

justing the height adjustable screw

feet.

Use the special spanner supplied to

do this.

Important! Do not use pieces of

wood, cardboard or such like to lev-

el out unevenness in the floor, but

adjust the height adjustable screw

feet instead.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

No comments

Aeg-Electrolux LAV74810 User Manual Page 29