AEG Electrolux Santo C 7 18 40-6i User Manual download pdf (Page 23)

The compressor starts after a

period of time.

See the "Cleaning and Care"

section.

This is normal, no error has

occurred.

The compressor does not start

immediately after changing

the temperature setting.

Water on the floor or on sto-

rage shelves.

Water drain hole is blocked.

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light bulb,

switch off the appliance and unplug it, or pull the fuse or the circuit breaker.

Light bulb data: 220-240 V, max. 15 W

1. To switch off the appliance, turn the

temperature regulator to position "0".

2. Unplug the mains plug.

3. To change the light bulb, undo the

screw.

4. Press the light bulb cover as shown

and slide it backwards.

5. Change the defective light bulb.

6. Refit the light bulb cover and the

screw.

7. Put the refrigerator back into operation.

AEG65

Malfunction Possible Cause Remedy

Regulations, Standards, Guidelines

This appliance was designed for household use and was manufactured in

accordance with the appropriate standards. The necessary measures in

accordance with appliance safety legislation regulations (GSG), accident

prevention regulations for refrigeration appliances (VBG 20) and the regu-

lations of the German Society of Electrical Engineers (VDE) were observed in

the manufacture of this appliance.

The refrigerant circuit has been checked for leaks.

This appliance is in accordance with the following EU guidelines:

– 73/23/EWG dated 19 February 1973 - low voltage guidelines.

– 89/336/EWG dated 3 May 1989

(including guideline change notice 92/31/EWG) - EMV guideline

Downloaded from Fridge-Manual.com Manuals

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

No comments

AEG Electrolux Santo C 7 18 40-6i User Manual Page 23