AEG Electrolux ESF 6800ROX User Manual download pdf (Page 19)

12. INSTALLATION

12.1 Fitting under a kitchen

counter

The plinth of a freestanding appliance is

not adjustable.

Do not remove the appliance worktop if

you want to use it as a freestanding unit.

It is not necessary to remove the worktop

when installing under a standard kitchen

counter.

Only remove the appliance worktop to in-

stall it under a close fitting sink unit or

kitchen counter (820 mm).

min 570 mm

600 mm

820 mm

1.

Put the appliance adjacent to

a water tap and a water drain.

2.

Make sure that the dimensions

of the recess agree with the di-

mensions in the figure.

Removing the worktop

4

3

2

1

3.

Remove the rear screws (1).

4.

Pull the worktop from behind

(2).

5.

Lift the worktop and move it

from the front slots. (3)

6.

Level the appliance using the

adjustable feet.

7.

Install the appliance under the

kitchen counter.

Adjusting the level of the

appliance

A correct adjustment of the level of the

appliance allows the door to close and

seal correctly.

If the door does not close correctly, loos-

en or tighten the adjustable feet to level

the appliance.

12.2 Water connection

Water inlet hose

Connect the inlet hose to a water tap with

an external BSP thread spout of 3/4″.

For best washing performance it is rec-

ommended to connect the appliance to a

cold water supply.

ENGLISH 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments