AEG Electrolux ESL 2435 Specifications download pdf (Page 18)

- 18 -

Installation

Preparing the outer door

Screw the guide rods and hinges on the door into place

using the predrilled holes.

Mount plate

Before installing the dishwasher and adjusting the door

onto the cupboard, put the mount plate into its correct

position on the shelf.

1. Place the mount plate in the middle of the cup-

board. Mark the holes for screws and the holes

for dismounting the outer door. There is a middle

mark on the plate to help you.

2. Drill 4 holes with a diameter of 7 mm. The door

can be disconnected if necessary, through hole

1 (two holes).

3. Then screw the plate into place from under-

neath using the 2 screws provided, with the

washers between.

4. Snap the hinges into the brackets on the mount

plate.

The outer door should be supported under-

neath in order to prevent the hinges from

breaking off.

5. Adjust the door to surrounding doors using

screws A, B and C.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

No comments

AEG Electrolux ESL 2435 Specifications Page 18