FAVORIT 55020ENDISHWASHER USER MANUAL
Activate the appliance. The appliance is not in setting mode when:• The time of the washing programme or of the delay start do not flash in the displa
Water hardnessWater hardness ad-justmentGerman degrees(°dH)French degrees(TH°)mmol/l Clarke de-greesmanually elec-troni-cally4 - 10 7 - 18 0,7 - 1,8 5
USE OF DISHWASHER SALTHow to fill the salt container1. Turn the cap counterclockwise and openthe salt container.2. Fill the salt container with 1 litr
5. Close the detergent dispenser. Press the lid until it locks into position.Use long washing programmes when you use the detergent tablets. These can
5. When the washing programme is completed, adjust the water softener to the waterhardness in your area.6. Adjust the quantity of rinse aid.LOADING CU
Programme Type of soil Type of load Programme descriptionUse this programme to quickly rinse thedishes. This prevents the remaining foodto bond on the
4. Set the washing programme.5. Press the Delay button again and again until the display shows the time of the delaystart.• The time of the delay star
End of the washing programmeWhen the washing programme is completed, the display shows a zero and the phase in-dicators go off.Deactivate the applianc
7. Put the filter (B) to its initial position.Make sure that it assembles correctly inthe two guides (C).8. Put the filter (A) into position in filter
Malfunction Possible cause Possible solution The water inlet hose is dam-aged.Make sure that the water inlethose has no damages.The appliance does no
FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno
Problem Possible cause Possible solution The spray arms could not turnfreely. Incorrect position ofthe items in the baskets.Make sure that an incorre
– The display shows the setting of the rinse aid dispenser.The rinse aid dispenser is off.The rinse aid dispenser is on.7. Press button Delay to chang
Make sure that the dimensions of the recessagree with the dimensions in the picture.How to remove the appliance worktop1. Remove the rear screws (1).2
• A stand pipe with vent-hole. The internal di-ameter must be minimum 4 cm.Remove the sink plug when the appliancedrains the water to prevent that the
www.aeg-electrolux.com/shop 117937560-A-312010
CONTENTS4 Safety information7 Product description8 Control panel10 Use of the appliance10 Setting the water softener12 Use of dishwasher salt12 Use of
SAFETY INFORMATIONBefore the installation and use, read this manual carefully:• For your safety and the safety of your property.• To help the environ
• Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwashercleaning agent, liquid detergent). This can cause damage to t
– If the water inlet hose or the safety valve are damaged, immediately disconnectthe mains plug from the mains socket.– Contact the service centre to
WARNING!The dishwasher detergents are dangerous and can cause corrosion !• If an accident occurs with these detergents, contact immediately a physicia
CONTROL PANEL1678925431 On/off button2 Programme guide3 Programme marker4 Indicators5 Display6 Start button7 Delay button8 Multitab button9 Programme
Programme guideThis guide helps you in the selection of the washing programme.DisplayThe display shows:• The electronic adjustment of the level of the
Comments to this Manuals