Aeg-Electrolux F84980VI User Manual download pdf (Page 10)

Operating instructions

NOTE: if the drying results are not satisfactory it is possible to activate

only the dosage of rinse aid.

The activation/deactivation of the dosage of rinse aid can only be

possible with the 3 in 1 function active.

Activation/deactivation of the dosage of rinse aid

(The dishwasher must be switched off)

When the dosage of rinse aid has been activated, also the rinse

aid indicator light on the control panel is automatically activated.

1. Press the On/Off button. All programme selection buttons indicator

lights will illuminate (setting mode).

If only one programme selection button indicator light is

illuminated, this means that a washing programme has been

selected. The programme must be cancelled: press simultaneously

the function buttons 2 and 3 for about 2 seconds, the indicator

light of the set programme button starts flashing.

After about 2 seconds the indicator lights of all the programme

selection buttons will illuminate indicating that the set programme

has been cancelled and that the machine is now in setting mode.

2. Press simultaneously function buttons 2 and 3, until the indicator

lights of the function buttons 1, 2 and 3 start flashing.

3. Press the function button 2, the indicator lights of function

buttons 1 and 3 turn off while the indicator light of the function

button 2 goes on flashing, the digital display indicates the current

setting.

4. To change the setting, press again the function button 2, the

digital display indicates the new setting.

5. To memorise the operation, switch off the dishwasher by pressing

the On/Off button or wait about 60 seconds after which the

dishwasher will automatically return to setting mode.

Rinse aid dosage deactivated

Rinse aid dosage activated

152955 36/0en 9-03-2005 14:33 Pagina 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

No comments

Aeg-Electrolux F84980VI User Manual Page 10