Aeg-Electrolux F88009W0P User Manual Page 1

FAVORIT 88009ENDISHWASHER USER MANUAL

Option touchpad Multitab ÖKO PLUS Extra-HygienePress three times ACTIVATED ACTIVATED DEACTIVATEDPress four times DEACTIVATED DEACTIVATED ACTIVATEDPres

2. Fill the salt container with dishwasher salt.3. Fill the rinse aid dispenser with rinse aid.4. Load cutlery and dishes into the appliance.5. Set th

Manual adjustmentTurn the water hardness dial to the position 1 or 2(refer to the table).Electronic adjustment1. Activate the appliance.2. Make sure t

USE OF DETERGENT AND RINSE AID2030MAX1234+-1234567Use of detergentTo help the environment, do not use more than the correct quantity of detergent.Obey

You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highestdosage).Turn the rinse aid selector 4 to increase or decrea

• Mix the spoons with other cutlery to prevent them to bond together.• When you put the items in the baskets, make sure that the water can touch all s

FunctionsProgramme Extra-Hygiene ÖKO PLUSYes, with effect Yes, with effectYes, without effect Yes, with effectYes, without effect Yes, without effectY

4. Set the washing programme.• The related programme indicator comes on.• The programme time flashes in the display.• The phase indicators of the set

– The washing programme stops.• Close the appliance door.– The washing programme continues from the point of interruption.Cancelling the washing progr

1. Turn the filter (A) counterclockwise andremove it out from filter (B).2. Filter (A) has two parts. To disassemble thefilter, pull them apart.3. Ful

FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno

WHAT TO DO IF…The start of the appliance does not occur or it stops during operation.First try to find a solution to the problem (refer to the table).

Malfunction Possible cause Possible solution The delay start is set. • Cancel the delay start.• When the countdown iscompleted, the washing pro-gramm

Problem Possible cause Possible solution The detergent can be thecause.Use a different brand of deter-gent.The dishes are wet. The washing programme

The rating plate on the inner edge of the appliance door shows the electrical connectiondata.If the hot water comes from alternative sources of energy

Steam protectionAttach the adhesive aluminium foil on the frontpart of the worktop along the full width.Adjust the height of the appliance1. Remove th

1. Install the brackets in the slots on the topof the appliance.2. Use the screws (on the top or on the side)to install the appliance in position. Mak

• A stand pipe with vent-hole. The internal di-ameter must be minimum 4 cm.Remove the sink plug when the appliancedrains the water to prevent that the

27

www.aeg-electrolux.com/shop 117934830-A-412010

CONTENTS4 Safety information7 Product description8 Control panel10 Use of the appliance11 Setting the water softener12 Use of dishwasher salt13 Use of

SAFETY INFORMATIONBefore the installation and use, read this manual carefully:• For your safety and the safety of your property.• To help the environ

• Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwashercleaning agent, liquid detergent). This can cause damage to t

– Be careful when you connect the water inlet hose:– Do not put the water inlet hose or the safety valve in water.– If the water inlet hose or the saf

WARNING!The dishwasher detergents are dangerous and can cause corrosion !• If an accident occurs with these detergents, contact immediately a physicia

CONTROL PANEL1345 679281 On/off button2 Programme guide3 Program touchpad4 Programme indicators5 Display6 Delay touchpad7 Start touchpad8 Indicators9

IndicatorsDoor indicator. It comes on when the door is open or not closed correctly.1) When the salt container and/or the rinse aid dispenser are empt