Aeg-Electrolux F88009W0P User Manual download pdf (Page 10)

Switch on the appliance. The appliance is not in setting mode when:

• Only one program indicator comes on.

• The display shows the time of a washing program or a delay start.

– To go back to the setting mode, it is necessary to cancel the program or the delay

start . Refer to 'Setting and starting a washing program'.

USE OF THE APPLIANCE

Refer to the specific instructions for each step of the procedure.

1. Check if the water softener level is correct for the water hardness in your area. If neces-

sary set the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the appliance.

5. Set the correct washing program for the type of load and soil.

6. Fill the detergent dispenser with the correct quantity of detergent.

7. Start the washing program.

If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), set the multitab function.

Refer to 'Multitab function'.

SETTING THE WATER SOFTENER

The water softener removes minerals and salts from the water supply. Minerals and salts

can have bad effect on the operation of the appliance.

Water hardness is measured in equivalent scales:

• mg/I (millimol per litre)

• ppm (parts per million),

• mmol/l (millimol per litre - international unit for the hardness of water).

Adjust the water softener in to the water hardness in your area. If necessary, contact your

local water authority.

Water hardness Water hardness setting

mg/l ppm mmol/l manually electronically

910 - 1250 910 - 1250 9.1 - 12.5 2 10

760 - 909 760 - 909 7.6 - 9.0 2 9

650 - 759 650 - 759 6.5 - 7.5 2 8

510 - 649 510 - 649 5.1 - 6.4 2 7

400 - 509 400 - 509 4.0 - 5.0 2 6

330 - 399 330 - 399 3.3 - 3.9 2 5

260 - 329 260 - 329 2.6 - 3.2 1 4

10 Use of the appliance

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

No comments

Aeg-Electrolux F88009W0P User Manual Page 10