Aeg-Electrolux F88060VI0P User Manual

FAVORIT 88060 VIENDISHWASHER USER MANUAL

DisplayThe display shows:• The electronic adjustment of the level of the water softener• The activation and deactivation of the rinse aid dispenser (o

• To set and start a delay start.• To adjust electronically the level of the water softener.• To activate or deactivate the rinse aid dispenser (only

4. Release touchpad (4) and touchpad (5).5. Press touchpad (6),• The indicators of touchpads (3), (4) and (5) go off.• The indicator of touchpad (6) c

Water hardnessWater hardness ad-justmentGerman degrees(°dH)French degrees(TH°)mmol/l Clarke de-greesmanually elec-tronical-ly23 - 28 40 - 50 4,0 - 5,0

USE OF DISHWASHER SALTHow to fill the salt container1. Turn the cap counterclockwise and openthe salt container.2. Fill the salt container with 1 litr

5. Close the detergent dispenser. Press the lid until it locks into position.Use long washing programmes when you use the detergent tablets. These can

5. When the washing programme is completed, adjust the water softener to the waterhardness in your area.6. Adjust the quantity of rinse aid.LOADING CU

Programme Type of soil Type of load Programme description43)Fresh soil Crockery and cutlery Wash 60 °CRinse54)Normal soil Crockery and cutlery Prewash

Programme Extra-Hygiene ÖKO PLUS5 Yes, with effect Yes, with effect6 Yes, with effect Yes, without effect7 Yes, without effect Yes, with effect8 Yes,

The water pressure and temperature, the variations of the mains supply and the quantity ofdishes can change the consumption values.SELECT AND START A

FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno

Interruption of a washing programme• Open the appliance door.– The washing programme stops.• Close the appliance door.– The washing programme continue

1. Turn the filter (A) counterclockwise andremove it out from filter (B).2. Filter (A) has two parts. To disassemble thefilter, pull them apart.3. Ful

WHAT TO DO IF…The start of the appliance does not occur or it stops during operation.First try to find a solution to the problem (refer to the table).

Malfunction Possible cause Possible solution The delay start is set. • Cancel the delay start.• When the countdown iscompleted, the washing pro-gramm

Problem Possible cause Possible solution The detergent can be thecause.Use a different brand of deter-gent.The dishes are wet. The washing programme

The rating plate on the inner edge of the appliance door shows the electrical connectiondata.If the hot water comes from alternative sources of energy

26

27

www.aeg.com/shop 117939362-A-512010

CONTENTS4 Safety information8 Product description9 Control panel12 Use of the appliance12 Setting the water softener14 Use of dishwasher salt14 Use of

SAFETY INFORMATIONBefore the installation and use, read this manual carefully:• For your safety and the safety of your property.• To help the environ

• Fill the appliance with salt before you start a washing programme. Remaining salt in theappliance can cause corrosion or make a hole in the bottom o

• Make sure not to squash or cause damage to the water hoses when you install the appli-ance.• Make sure that the water couplings are tight to prevent

WARNING!Visible led radiation, do not look directly into the beam.The LED of the lamp is CLASS 2 and agrees with IEC 60825-1: 1993 + A1:1997 + A2:2001

PRODUCT DESCRIPTION234567189101 Upper basket2 Water hardness dial3 Salt container4 Detergent dispenser5 Rinse aid dispenser6 Rating plate7 Filters8 Lo

The TimeBeam shows:• The washing programme time. It decreases withsteps of one minute• The end of the washing programme, a zero shows on the kitchen f