Aeg-Electrolux S83800CTM0 User Manual Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 80
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 49
1
2
3
6
5
4
Remove the handle. Unscrew the top
handle bracket from the handle rod (1).
Unscrew the bottom handle bracket
from the door (2)
Unscrew the top handle bracket from
the door (3).
Re-screw the handle bracket on the
door (4). Turn the handle bracket with
the handle and screw them to the door
(5) and the fitted handle bracket (6)
Re-insert the door on the lower hinge
pivot .
Re-insert the door on the upper hinge
pivot slightly tilting the door.
Screw the lower hinges.
Refit the plinth.
Stand the appliance upright.
Do a final check to make sure that:
All screws are tightened.
The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natu-
ral fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The Af-
ter Sales Service specialist will carry out
the reversibility of the doors at your cost.
TECHNICAL DATA
Dimension
Height 1850 mm
Width 595 mm
Depth 658 mm
Rising Time 18 h
Voltage 230 - 240 V
Frequency 50 Hz
The technical information are situated in
the rating plate on the internal left side of
the appliance and in the energy label.
50
www.aeg.com
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 79 80

Comments to this Manuals

No comments