AEG Electrolux S86348KG1 User Manual download pdf (Page 21)

2. Remove the screw from the lamp cover.

3. Remove the lamp cover.

4. Replace the bulb (E14 socket) with one of

the same power (the maximum power is

shown on the lamp cover).

5. Install the lamp cover.

6. Tighten the screw to the lamp cover.

7. Connect the mains plug to the power

socket.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "Installation".

3. If necessary, replace the defective door gaskets. Contact the Service Center.

Technical data

S86340KG1 S86348KG1

Dimension

Height 2000 mm 2000 mm

Width 595 mm 595 mm

Depth 623 mm 623 mm

Rising Time 10 h 10 h

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

Installation

WARNING!

Read the "Safety Information" carefully for your safety and correct operation of the ap‐

pliance before installing the appliance.

Positioning

Install this appliance at a location where the ambient temperature corresponds to the

climate class indicated on the rating plate of the appliance:

Technical data

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

AEG Electrolux S86348KG1 User Manual Page 21