Aeg-Electrolux B9931-5-M User Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
3. Hold the door glass panels on their top edge one by one and pull them upwards out
of the guide
4. Clean the door glass panels.
To install panels follow the procedure in reverse. Insert the smaller panel first, then
the larger.
WHAT TO DO IF…
WARNING!
Refer to "Safety information" chapter.
Problem Possible cause Solution
The oven does not heat up The appliance is switched off Switch on the appliance
The oven does not heat up The clock is not set Set the clock. Refer to "Setting
the clock"
The oven does not heat up The necessary settings are not
set
Make sure, the settings are cor-
rect
The oven does not heat up The automatic cut-out is
switched on
Refer to „Automatic cut-out
The oven does not heat up The fuse is released Make sure, if the fuse is the
cause for the malfunction. If
the fuse releases again and
again, refer to an authorized
electrician
The oven lamp does not operate The oven lamp is defective Replace the oven lamp.
The display shows F11 There is a short circuit of
the meat probe
The meat probe plug is not
correctly installed into the
meat probe socket
Install the meat probe plug as
far as possible
The display shows an error
code that is not in this list
There is an electronic fault Switch off the appliance
with the house fuse or the
safety switch in the fuse
box and switch it on again
If the display shows the er-
ror code again, refer to the
Customer Care Department
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
26
What to do if…
Page view 25
1 2 ... 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments