Aeg-Electrolux T56740 User Manual download pdf (Page 32)

Connect the machine to an earthed socket, in accordance with current wiring

regulations.

WARNING!

The manufacturer declines any responsibility for damage or injury through

failure to comply with the above safety precautions. Should the appliance

power supply cable need to be replaced, this must be carried out by our

Service Center.

WARNING!

The power supply cable must be accessible after installing the machine.

Changing door stop

WARNING!

The door stop may only be changed by a specialist. If necessary, please contact our

after-sales service or your specialist dealer.

WARNING!

Before changing the door stop, disconnect the mains plug.

1. Open loading door.

Unscrew hinge A from the front of the

machine and take off the loading door.

Remove cover plates B and C. To do this,

insert a thin screwdriver into the slots as

shown in the illustration, press down-

wards slightly and pry out the cover

plates.

4. Use an appropriate tool and exert pres-

sure to unfasten locking block D from

the snap-on fixture, take out and re-in-

sert on the other side having rotated the

block through 180°.

Unscrew hinge A from the loading door,

rotate through 180°, re-insert on the

opposite side and screw down.

Installation

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

No comments

Aeg-Electrolux T56740 User Manual Page 32