Aeg-Electrolux T56740 User Manual download pdf (Page 17)

Starting the programme

Press the START PAUSE START PAUZE button.

Led above stops flashing, becomes steady. The

programme is started. Display shows elapsing

cycle time or delay time if activated.

Changing programme

To change a programme which has been selected by mistake once the programme

has started, first turn the programme selector to OFF UIT and then reset the pro-

gramme.

The programme can no longer be changed directly once the programme has started.

If nevertheless there is an attempt to change the programme on the programme

knob, the programme progress display and the maintenance indicators flash. If an

option button (excluding the BUZZER ZOEMER button) is pressed, Err appears in

the multidisplay. The drying programme is not however affected by this (laundry

protection).

Putting in extra items or taking items out before end of programme

1. Open loading door.

WARNING!

Laundry and drum can become hot. Risk of burns!

2. Load or remove laundry items.

3. Close loading securely. Lock must audibly lock.

Press the START PAUSE START PAUZE button to continue the drying cycle.

Drying cycle complete / removing laundry

Once the drying cycle is complete, display shows a blinking "0". If the BUZZER

ZOEMER button has been pressed, an acoustic signal sounds intermittently for

about one minute.

Daily use

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 36 37

No comments

Aeg-Electrolux T56740 User Manual Page 17