AEG Electrolux 700 D Operations Instructions download pdf (Page 13)

Use one more internet line cable and plug one end of the

internet line cable to the “Out” socket at the back of the

PROTECT A. UPS. Plug the other end of the modem input

socket as shown below.

4.6 USB and serial cable connection

To allow for unattended system shutdown for your operating

system, connect the USB or the RS232 serial cable as shown

below. For the USB serial cable just simply plug into the UPS

and PC and it will be auto detected.

4.7 Turn On/Off

To turn on the PROTECT A., press the power switch lightly.

To turn off the PROTECT A., press the power switch again.

4.8 Deep discharge protection

The PROTECT A. is equipped with Green Power Function.

For saving power and protecting the battery, this method of

deep discharge protection is adopted in inverter mode.

4.9 Battery removal

Disconnect all power sources before battery replacement.

Follow Fig. 1 below to remove the screw located on the

bottom of the front panel and then open the front cover.

RS232

connection

USB port

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

No comments

AEG Electrolux 700 D Operations Instructions Page 13