Aeg-Electrolux BS9304001M User Manual download pdf (Page 25)

Removing and cleaning the door glass panels

1. Remove the door.

2. Hold the door trim (B) on the top edge

of the door at the two sides and push

inwards to release the clip seal.

3. Pull the door trim to the front to re-

move it.

4. Hold the door glass panels on their top

edge one by one and pull them up out

of the guide

5. Clean the door glass panels.

To install panels follow the procedure in re-

verse. Install the smaller panel first, then the

larger.

Oven lamp

WARNING!

There is a risk of electrical shock.

The oven lamp and the lamp glass cover can be hot.

Before you change the oven lamp:

• Deactivate the appliance.

• Remove the fuses from the fuse box or deactivate the circuit breaker.

CAUTION!

Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp

glass cover and the cavity.

Replacing the lamp:

1. You can find the lamp glass cover at the cavity ceiling.

Turn the lamp glass cover counterclockwise to remove it.

2. Remove the metal ring and clean the glass cover.

3. If necessary, replace the lamp with applicable 300°C heat-resistant lamp.

Use the same lamp type.

4. Fit the metal ring to the glass cover.

5. Install the glass cover.

Care and cleaning 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

No comments

Aeg-Electrolux BS9304001M User Manual Page 25