AEG Electrolux SANTO K 7 10 00-4i User Manual download pdf (Page 26)

Downloaded from www.vandenborre.be

3. Remove the lamp cover (refer to the il-

lustration).

4. Replace the used lamp with a new lamp

of the same power (the maximum power

is shown on the lamp cover).

5. Install the lamp cover.

6. Tighten the screw to the lamp cover.

7. Connect the mains plug to the mains

socket.

8. Open the door. Make sure that the lamp

comes on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "Installation".

3. If necessary, replace the defective door gaskets. Contact the Service Force Center.

Technical data

Dimension of the recess

Height 1030 mm

Width 560 mm

Depth 550 mm

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

Installation

Positioning

WARNING!

If you are discarding an old appliance that has a lock or catch on the door, you must ensure

that it is made unusable to prevent young children being trapped inside.

The appliance shall have the plug accessible after installation.

Install this appliance at a location where the ambient temperature corresponds to the

climate class indicated on the rating plate of the appliance:

Technical data

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 83 84

No comments

AEG Electrolux SANTO K 7 10 00-4i User Manual Page 26