Aeg-Electrolux L14950A User Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
The programme time will automatically increase by a few minutes.
5.
Press button 7 to start the programme.
After the programme has started, the time remaining is updated every minute.
Note!
The different type of cottons (towelling, sheets, shirts, and so on) or any laundry
items rolling up during the spinning phase may result in partial dryness. In the excep-
tional case that at the end of the cycle the laundry remains slightly wet, we suggest
that you unfold the rolled up items, redistribute them evenly in the drum and select
an additional drying cycle of 20-30 minutes.
6.
At the end of the drying programme, the buzzer sounds. A blinking « 0 » appears on
the display. At this point, begins an anti-crease phase which lasts for about 10 mi-
nutes. During this time the ANTI-CREASE symbol appears on the display. The DOOR
symbol remains lit. The door cannot be opened.
If you need to open the door before or during the anti-crease phase or to interrupt it,
press any button or turn the programme selector dial to any programme position (except
O ), the door can be opened immediately or after a few minutes depending on the mod-
el. (In any case do not try to open the door if it is locked!) .
7.
Turn the selector dial to the O position to switch the machine off.
8. Remove the laundry.
Automatic washing and drying (NON-STOP programme)
For NON-STOP programmes, the recommended load size is 4 kg for cotton and 3 kg for
synthetic.
It is possible to dry up to 6 kg of cotton items by pressing the Drying Time button only
(see the «Drying Programme » table).
CAUTION!
Do not use a dosing device/ball when carrying out a washing and drying programme.
1. Load the laundry.
2. Add detergent and fabric softener.
3. Switch the machine on by turning the selector dial to the selected washing programme/
fabric.
4. Select the required options by pressing the relevant buttons.
If possible, do not select a spin speed lower than that proposed by the appliance to avoid
too long a drying time therefore saving energy.
In any case the reduction of the spin speed is only possible after selecting drying.
The lowest values you can select are the following:
900 r.p.m. for cottons and synthetic with electronic drying;
900 r.p.m. for cottons and 700 r.p.m. for fabrics with timed drying.
5.
Select the drying time by pressing button 4 or the dryness degree by pressing button
3 . The display shows the entire duration of the washing and the selected drying cycle.
6.
Start the programme by pressing button 7 . After the programme has started, the
time remaining is updated every minute.
7. At the end of the programme, follow the indications given in the corresponding pre-
vious chapter.
16
Use - Drying
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Comments to this Manuals

No comments