Aeg-Electrolux L52840 User Manual download pdf (Page 8)

1. Pull out the dispenser drawer until it

stops. Measure out the amount of de-

tergent required, pour it into the main

wash compartment

and, if you wish

to carry out the prewash phase or to

perform the stain function, pour the

detergent or the stain remover into the

compartment marked

2. If required, pour fabric softener into the

compartment marked

(the amount

used must not exceed the MAX mark in

the drawer). Close the drawer gently.

Select the required programme by means of programme selector dial (1)

You can choose the right programme for any type of laundry following the descriptions on

the washing programme tables (see «Washing Programmes»).

Turn the programme selector dial to the required programme. The programme selector de-

termines the type of washing cycle (e.g. water level, drum movement, number of rinses) and

the washing temperature according to the type of laundry.

The pilot light of button 5 starts blinking.

The selector dial can be turned either clockwise or anticlockwise. Position

to Reset pro-

gramme/ Switching OFF of the machine.

At the end of the programme the selector dial must be turned to position

, to

switch the machine off.

If you turn the programme selector dial to another programme when the machine is work-

ing, the yellow pilot light of button 5 will blink 3 times to indicate a wrong selection. The

machine will not perform the new selected programme.

Select the SPIN speed or the RINSE HOLD option (Button 2)

When the required programme has been selected, your appliance automatically proposes

the maximum spin speed provided for that programme.

8 Daily use

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

No comments

Aeg-Electrolux L52840 User Manual Page 8