Aeg-Electrolux L61470BI User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
During machine operation it is possible
that the yellow pilot light of button 8
blinks, one of the following alarm codes
appears on the display and at the same
time some acoustic signals sound every
20 seconds to indicate that the machine
is not working:
: problem with the water supply
: problem with the water drain-
ing
: door open
: anti-flooding system has activa-
ted
Once the problem has been eliminated,
press the button 8 to restart the pro-
gramme. If after all checks, the problem
persists, contact your local Service Cen-
tre.
Problem Possible cause/Solution
The washing machine
does not start:
The door has not been closed.
Close the door firmly.
The plug is not properly inserted in the power sock-
et.
Insert the plug into the power socket.
There is no power at the socket.
Please check your domestic electrical installation.
The main fuse has blown.
Replace the fuse.
The programme dial is not correctly positioned and
the button 8 has not been pressed.
Please turn the programme dial and press the but-
ton 8 again.
The delay start has been set.
If the laundry is to be washed immediately, cancel
the delay start.
The Child safety lock has been activated.
Deactivate this device.
The machine does not
fill:
The water tap is closed.
Open the water tap.
The inlet hose is squashed or kinked.
Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are
blocked.
Clean the water inlet filters. (See "Cleaning the
water inlet filters" for more details)
The door is not properly closed.
Close the door firmly.
The machine fills then
empties immediately:
The end of the drain hose is too low.
Refer to relevant paragraph in «Water drainage»
section.
22
www.aeg.com
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Comments to this Manuals

No comments