Aeg-Electrolux L98695FL User Manual download pdf (Page 22)

You cannot set the delay start with

the Steam programme.

STARTING A PROGRAMME

1.

Touch button

6

to start the pro-

gramme. The indicator of button

6

stops to flash and is on with red col-

our.

If a delayed start is set, the appliance

starts the countdown.

The appliance adjust automat-

ically the cycle time to the

laundry you have put in the

drum to have perfect washing

results in the minimum neces-

sary time. After approximately

15 minutes from the start of

the programme, the display

shows the new time value.

INTERRUPT A PROGRAMME

1.

Touch button

6

. The indicator

flashes.

2.

Touch button

6

again. The washing

programme continues.

CANCEL A PROGRAMME

1.

Press button

1

to cancel the pro-

gramme and to deactivate the appli-

ance.

2.

Press button

1

again to activate the

appliance. Now, you can set a new

washing programme.

The appliance does not drain the

water.

CHANGE A FUNCTION

You can change only some functions be-

fore they operate.

1.

Touch button

6

. The indicator

flashes.

2.

Change the function set.

3.

Touch button

6

again. The washing

programme continues.

OPEN THE DOOR

While a programme or the delay start op-

erates, the appliance door is locked.

To open the appliance door:

1.

Touch button

6

. The door lock

symbol in the display goes off and a

message tells you that the door is un-

locked.

2.

Open the appliance door.

3.

Close the appliance door and touch

button

6

again. The programme or

the delay start continues.

If the temperature and the level of

the water is too high, the door

lock symbol stays on. You cannot

open the door. If necessary, do

the following procedure to open

the door:

1.

Deactivate the appliance.

2.

Wait for some minutes.

3.

Make sure that no water is in

the drum.

If you deactivate the appliance, it

is necessary to set the programme

again.

AT THE END OF THE PROGRAMME

1.

The appliance stops automatically.

2.

The acoustic signals operate, if it is

active.

3.

In the display goes on and the

message tells you that the pro-

gramme is completed.

4.

The indicator of button

6

goes off.

5.

The door lock symbol goes off.

6.

Press button

1

to deactivate the ap-

pliance. After five minutes from the

end of the programme, the AUTO

OFF function automatically deacti-

vates the appliance.

22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

Comments to this Manuals

No comments