Aeg-Electrolux LAV54810 User Manual download pdf (Page 18)

What to do if...

Remedying small faults yourself

If the programme progress display indicates one of the following fault

codes during operation:

– END flashes 1x (problem with water inlet),

– END flashes 2x (problem with water outflow),

– END flashes 4x (door open),

please consult the following table.

After the fault has been remedied, press the START/PAUSE button

In the case of other fault messages (one or more flashing indicators on

the programme progress display):

switch the appliance off and on again. Set the programme again. Press

the START/PAUSE button.

If the fault appears again, please contact your local Service Force Cen-

tre.

Problem Possible cause Remedy

Washing machine does

not work.

Power plug not plugged in

or problem with the fuse.

Connect the plug to a mains

socket. Check the fuse.

The door is not shut proper-

ly.

Close the door - there should

be an audible click.

The START/PAUSE button

was not pressed for long

enough.

Press the START/PAUSE but-

ton for longer.

The door cannot be

closed.

The child safety device is ac-

tivated.

Deactivate the child safety

device.

The END indicator is

flashing 4 times, and si-

multaneously an acous-

tic signal is sounding 4

times.

The door is not closed prop-

erly.

Close the door properly. Re-

start the programme.

The END indicator is

flashing 1x, and simul-

taneously an acoustic

signal is sounding 1x.

(Problems with the wa-

ter inflow.)

The tap is turned off. Turn on the tap.

The filter in the inlet hose

screw connection is blocked.

Turn off the tap. Unscrew the

hose, remove the filter and

clean it.

The tap is blocked by limes-

cale or is faulty.

Check the tap and have it re-

paired, if necessary.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Comments to this Manuals

No comments

Aeg-Electrolux LAV54810 User Manual Page 18

Comments to this Manuals

Related products and manuals for Washing machines Aeg-Electrolux LAV54810