Aeg-Electrolux LAVALOGIC1820 User Manual download pdf (Page 37)

If the appliance is to stand on a

plinth:

In order for the appliance to be se-

cure on the plinth, fixing plates*)

must be mounted, into which the

appliance is inserted.

If the appliance is to stand on floors that vibrate, e. g. floors of

wooden joists with deal boards:

If possible, install the appliance in one corner of the room.

1. Screw a water-resistant wooden board (at least 15 mm thick) onto at

least 2 of the floor joists.

2. Affix fixing plates *) onto the wooden board, into which the appliance

is inserted.

*) The fixing plates can be obtained from the Customer Care Depart-

ment.

Making the appliance level

3 Automatic foot: The rear foot on the left-hand side of your washing

machine is built as a shock absorbing foot, which is why the appliance

gives in the back left-hand corner if put under load. The automatic foot

guarantees that the appliance does not move even at high spin speeds.

Basically the automatic foot does not need to be set.

The four feet of the appliance are

pre-adjusted.

Large degrees of unevenness can be

compensated for by individually ad-

justing the height adjustable screw

feet.

Use the special spanner supplied to

do this.

Important! Do not use pieces of

wood, cardboard or such like to lev-

el out unevenness in the floor, but

adjust the height adjustable screw

feet instead.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

No comments

Aeg-Electrolux LAVALOGIC1820 User Manual Page 37