Aeg-Electrolux 740D-M User Manual Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
33
Maintenance and care
The hood must always be disconnected from the mains power
supply before beginning any maintenance work.
Cleaning
Warning: always disconnect the hood from the mains power supply
before cleaning it. Never insert pointed objects in the motors
protective grid.
Wash the outside surfaces using a delicate detergent solution. Never
use caustic detergents or abrasive brushes or powders.
Only ever clean the switch panel and filter grille using a damp cloth
and delicate detergents.
It is extremely important to clean the unit and change the filters at
the recommended intervals. Failure to do so will cause grease
deposits to build up that could constitute a fire hazard.
Metal grease filter
The purpose of the grease filters is to aspirate grease particles which
form during cooking and it must always be used, either in the
external evacuation or internal recycling function. Attention: the
metal grease filters must be removed and washed, either by hand or
in the dishwasher, every four weeks.
Open the metal grease filter
Pull the drawer all the way out and press the handles Q1/Q2 locking
the grease filter N1,N2 first towards the opposite side and then down.
Fig. 4.
Hand washing
Soak grease filters for about one hour in hot water with a grease-
loosening cleaner, then rinse off thoroughly with hot water. Repeat
the process if necessary. Refit the grease filters when it are dry.
Dishwasher machine
Place grease filters in dish washer. Select
most powerful washing programme and
highest temperature, at least 65°C. Repeat
the process. Refit the grease filters
when it are dry.
When washing the metal
grease filter in the
dishwasher a slight
discoloration of the filter
can occur, this does not
have any impact on its
performance.
Clean the inner housing
using a hot detergent
solution only (never use
caustic detergents,
abrasive powders or brushes).
Fig. 4
N1
N2
Q1
Q2
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 71 72

Comments to this Manuals

No comments