Aeg-Electrolux F88002W0P User Manual

FAVORIT 88002ENDISHWASHER USER MANUAL

Option touchpad Multitab ÖKO PLUS Extra-HygienePress three times ACTIVATED ACTIVATED DEACTIVATEDPress four times DEACTIVATED DEACTIVATED ACTIVATEDPres

2. Fill the salt container with dishwasher salt.3. Fill the rinse aid dispenser with rinse aid.4. Load cutlery and dishes into the appliance.5. Set th

Manual adjustmentTurn the water hardness dial to the position 1 or2 (refer to the table).Electronic adjustment1. Activate the appliance.2. Make sure t

USE OF DETERGENT AND RINSE AID2030MAX1234+-1234567Use of detergentTo help the environment, do not use more than the correct quantity of detergent.Obey

You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (high-est dosage).Turn the rinse aid selector 4 to increase or decr

• Mix the spoons with other cutlery to prevent them to bond together.• When you put the items in the baskets, make sure that the water can touch all s

Programme Type of soil Type of load Programme descriptionUse this programme to quickly rinse thedishes. This prevents the remaining foodto bond on the

Programme1)Energy (kWh) Water (litre)1,3 - 1,5 14 - 150,8 - 0,9 11 - 120,1 41) The display shows the programme time.The water pressure and temperature

– The indicator of the phase in operation is on.The opening of the appliance door stops the countdown. When you close the door, thecountdown continues

• First remove the items from the lower basket, then from the upper basket.• There can be water on the sides and on the door of the appliance. Stainle

FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno

To clean the spray armsDo not remove the spray arms.If the holes in the spray arms become clogged, remove remaining parts of soil with athin pointed o

Malfunction Possible cause Possible solutionThe start of the washing pro-gramme does not occur.The appliance door is open.The door indicator is on.Clo

Problem Possible cause Possible solution Incorrect level of the watersoftener adjustment.Adjust the water softener withthe correct level. The salt c

Depth 625 mmWater supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa)Water supply 1)Cold water or hot water maximum 60 °CCapacity Pl

Make sure that the dimensions of the recessagree with the dimensions in the picture.How to remove the appliance worktop1. Remove the rear screws (1).2

• A stand pipe with vent-hole. The internal di-ameter must be minimum 4 cm.Remove the sink plug when the appliancedrains the water to prevent that the

26

27

www.aeg-electrolux.com/shop 117937580-A-312010

CONTENTS4 Safety information7 Product description8 Control panel10 Use of the appliance11 Setting the water softener12 Use of dishwasher salt13 Use of

SAFETY INFORMATIONBefore the installation and use, read this manual carefully:• For your safety and the safety of your property.• To help the environ

• Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwashercleaning agent, liquid detergent). This can cause damage to t

– If the water inlet hose or the safety valve are damaged, immediately disconnectthe mains plug from the mains socket.– Contact the service centre to

WARNING!The dishwasher detergents are dangerous and can cause corrosion !• If an accident occurs with these detergents, contact immediately a physicia

CONTROL PANEL1345 679281 On/off button2 Programme guide3 Program touchpad4 Programme indicators5 Display6 Delay touchpad7 Start touchpad8 Indicators9

IndicatorsDoor indicator. It comes on when the door is open or not closed correctly.1) When the salt container and/or the rinse aid dispenser are empt