Aeg-Electrolux F88015IM User Manual download pdf (Page 25)

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

This dishwasher is designed to be fitted under a kitchen counter or work surface.

Attention! Carefully follow the instructions on the enclosed template for building in the

dishwasher and fitting the furniture panel.

No further openings for the venting of the dishwasher are required, but only to let the

water fill and drain hose and power supply cable pass through.

The dishwasher incorporates adjustable feet to allow the adjustment of the height.

During all operations that involve accessibility to internal components the dishwasher has

to be unplugged.

When inserting the machine, ensure that the water inlet hose, the drain hose and the supply

cable are not kinked or squashed.

Fixing to the adjacent units

The dishwasher must be secured against tilting.

Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure

(adjacent kitchen unites, cabinets, wall).

Levelling

Good levelling is essential for correct closure and sealing of the door. When the appliance

is correctly levelled, the door will not catch on either side of the cabinet. If the door does

not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water connection

Water supply connections

This appliance can be connected to either a hot (max. 60°) or cold water supply.

With a hot water supply you can have a significant reduction of energy consumption. This

however, depends on how the hot water is produced. (We suggest alternative sources of

energy that are more environmentally friendly as e.g. solar or photovoltaic panels and

aeolian).

For making the connection itself, the coupling nut fitted to the machine's supply hose is

designed to screw onto a 3/4" thread spout or to a purpose made quick-coupling tap such

as the Press-block.

The water pressure must be within the limits given in the "Technical specifications". Your

local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected.

The dishwasher features fill and drain hoses which can be turned either to the left or the

right to suit the installation by means of the locknut.

The locknut must be correctly fitted to avoid water leaks.

(Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut.

In this case, this kind of facility is not possible). If the machine is connected to new pipes

or pipes which have not been used for a long time, you should run the water for a few

minutes before connecting the inlet hose.

DO NOT use connection hoses which have previously been used for an old appliance.

Water connection

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Aeg-Electrolux F88015IM User Manual Page 25