AEG Electrolux EFT 929 Operations Instructions download pdf (Page 40)

40 818 36 43-01/7

If after the above checks there is still a fault, call your local AEG Service

Force Centre.

In-guarantee customers should ensure that the above checks have been

made as the engineer will make a charge if the fault is not a

mechanical or electrical breakdown.

Please note that proof of purchase is required for in-guarantee service

calls.

Regulations, Standards, Guidelines

This appliance was designed for household use and was manufactured

in accordance with the appropriate standards. The necessary measures

in accordance with appliance safety legislation regulations (GSG),

accident prevention regulations for refrigeration appliances (VBG 20)

and the regulations of the German Society of Electrical Engineers (VDE)

were observed in the manufacture of this appliance.

The refrigerant circuit has been checked for leaks.

Excessive build up of frost.

If the door seal is not airtight (probably

after reversing the door) apply warm air

to the non sealing area using a hair dryer

set to a gentle heat. (do not use a fan

heater for this purpose). This will make

the rubber more supple and allow it to

revert to its original shape.

The compressor runs continuously

Adjust the temperature to give correct

temperature control.

Check that the doors are closed.

Large quantities of food have recently

been placed in the cabinet and/or door is

frequently opened.

Check that air ventilation is not

obstructed.

Noise Refer to Normal Operating Sounds

The compressor does not start

immediately after changing the

temperature setting.

This is normal, the compressor starts after

a period of time.

Symptom Solution

Downloaded from Fridge-Manual.com Manuals

1 2 ... 35 36 37 38 39 40 41 42 43 44

No comments

AEG Electrolux EFT 929 Operations Instructions Page 40