AEG Electrolux ERU 13300 Specifications download pdf (Page 14)

Fitting the plinth

Important

For the efficient operation of the appliance, it is

important that the original ventilation grid is

used.

■ For an opening height dimension A=820 mm and a

plinth height dimension a=100 mm, the plinth may

be fitted without adjustments. The same applies to

an opening height dimension B=870 mm and a

plinth height dimension b=150 mm.

■ For plinth heights greater than a=100 mm, b=150

mm, a cut should be made in the plinth, 580 mm

wide, in the centre of the appliance position,

leaving a remaining height of a=100 mm, b=150

mm.

■ Attach plinth to the kitchen units.

Important

The plinth must be positioned at a minimun

distance of 25 mm from the door.

8.Should the lining up of the furniture door be

necessary, use the clearance of slots. At the end of

operations, it is necessary to check if the door of

the furniture closes properly.

8mm

PR167

7.Open the appliance door and the furniture door at

90°. Insert the small square (B) into guide (A). Put

together the appliance door and the furniture door

and mark the holes as indicated in the figure.

Remove the squares and drill holes with Ø 2 mm at

8 mm from the outer edge of the door. Place the

small square on the guide again and fix it with the

screws supplied.

PR168

PR167/1

9.Fix cover (D) on guide (B) until it clips into place.

S.I.007

S.I.008

580

a = 100

b = 150

25 - 80

A = 820

B = 870

Downloaded from Fridge-Manual.com Manuals

1 2 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

AEG Electrolux ERU 13300 Specifications Page 14

Comments to this Manuals

Related products and manuals for Fridge-freezers AEG Electrolux ERU 13300