Aeg-Electrolux 41016VH-WN User Manual download pdf (Page 8)

Setting the time

The oven only operates after time set.

When you connect the appliance to the electri-

cal supply or in case of a power cut, the Time

function indicator flashes automatically.

To set the current time use " + " or " - " button.

After approximately 5 seconds, the flashing

stops and the display shows the time of day set.

For time change you must not set an automatic

function (Duration

or End ) at the same

time.

HOB - DAILY USE

Residual heat indicator

The residual heat indicator comes on when a cooking zone is hot.

WARNING!

Risk of burns from residual heat!

When a cooking zone operates, it hums for a short time. This is typical of all ceramic

glass cooking zones and does not show that the appliance operates incorrectly.

Heat settings

Control knob Function

Off position

1-9

Heat settings

(1 = lowest heat setting; 9= highest heat setting)

1. Turn the control knob to a necessary heat setting.

2. To complete the cooking process, turn the control knob to the “0” position.

Use of the double zone

WARNING!

To set double zone on turn the control knob with the double zone to the right (do not

turn it thought the stop position).

1. Turn the control knob to the right - to position "9".

2. Turn the control knob slowly to symbol

until you can hear a click.

At this time the two cooking zones are on.

3. To set necessary heat setting refer to "Heat settings".

Hob - Daily Use

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

No comments

Aeg-Electrolux 41016VH-WN User Manual Page 8