Aeg-Electrolux C41029G-M User Manual download pdf (Page 28)

Instructions for the installer

10.6 Gas regulations

If the cooking appliance is set up for a

different

type of gas than that available, its injectors must

be replaced, the minimum flow regulated and the rubber-holder changed. In order to replace the

injectors in the cooking hob, it is necessary to carry out the following operations:

• remove the pan supports;

• remove the burners and burner caps (

Fig. A

);

• take out the injector (

Fig. B

) and replace it with one

suitable for the new type of gas (see "

ENERAL

INJECTORS TABLE

" on page 29);

• replace the gas label (on the rear of the appliance) with

the new one provided with the injectors kit;

• refit all parts by following the disassembly instructions in

reverse order and taking care to position the burner cap

correctly on the burner.

10.6.1 Minimum flow of valved cooking hob taps

• Switch on the burner and turn the control knob

towards the minimum flow position

;

• remove the knob;

• using a screwdriver, adjust the internal screw

until the correct low flame is obtained;

• refit the knob.

10.6.2 Minimum flow of non-valved cooking hob taps

• Switch on the burner and turn the control knob

towards the minimum flow position

;

• remove the knob;

• insert a small screwdriver into the rod of the tap

and adjust the internal screw

until the correct

low flame is obtained;

• refit the knob.

• Unscrew the adjustment screw Z to increase the flow, or tighten it to reduce the flow.

• The adjustment is correct when the low flame measures approximately 3 or 4 mm.

• For butane/propane, the adjustment screw should be tightened all the way.

• When changing quickly from maximum to minimum flow and vice versa make sure that the

flame does not go out.

1 2 ... 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Aeg-Electrolux C41029G-M User Manual Page 28

Comments to this Manuals

Related products and manuals for Kitchen & houseware accessories Aeg-Electrolux C41029G-M