Aeg-Electrolux BE7304021M User Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
2. Hold the door t (B) on the top edge of
the door at the two sides and push in-
wards to release the clip seal.
3. Pull the door t to the front to remove it.
4. Hold the door glass panels on their top
edge one by one and pull them up out of
the guide
5. Clean the door glass panels.
To install panels follow the procedure in re-
verse. Install the smaller panel first, then the
larger.
WHAT TO DO IF…
WARNING!
Refer to "Safety information" chapter.
Problem Possible cause Solution
The appliance does not
heat up
The appliance is deacti-
vated
Activate the appliance
The appliance does not
heat up
The time of day is not
set
Set the clock. Refer to "First setting the
time of day"
The appliance does not
heat up
The necessary settings
are not set
Make sure, the settings are correct
The appliance does not
heat up
The automatic switch-
off is activated
Refer to „Automatic switch-off“
The appliance does not
heat up
The fuse is released Make sure, if the fuse is the cause for the
malfunction. If the fuse releases again and
again, refer to an authorized electrician
The oven lamp does not
operate
The oven lamp is defec-
tive
Replace the oven lamp.
The display shows an
error code that is not in
this list
There is an electronic er-
ror
Deactivate the appliance with the house
fuse or the safety switch in the fuse box
and activate it again
If the display shows the error code
again, refer to the Service Center
B
What to do if…
25
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments