Aeg-Electrolux B5741-5-M User Manual download pdf (Page 30)

Cleaning and Care30

Accessories

Wash all slide-in units (shelf unit, baking tray, shelf support rails etc.) after each use and

dry well. Soak briefly to make them easier to clean.

Fat Filter

1. Clean the fat filter in hot water and washing up liquid or in the dishwasher.

2. Badly burned on soiling can be removed by boiling the filter in a little water to which 2-

3 tablespoonsful of dishwasher cleaner has been added.

Pyrolytic cleaning

1 Warning: The oven gets extremely hot during this process. Young children must be kept

away.

1 Important! Before carrying out pyrolytic cleaning, all removable parts including the side

rails, must be removed from the oven.

3 If you use the oven shelf runners that are available as special accessories, these must

be removed before pyrolytic cleaning.

If the side rails or oven shelf runners are still in place, ‘C1’ appears in the clock display.

The pyrolytic cleaning process then cannot be started due to a safety cut-out that pro-

tects the side rails/oven shelf runners.

Pyrolytic cleaning

1. First remove the worst of the residue manually.

2. Select oven function Pyroluxe menue .

– “3:15” appears in the display,

– Cook time flashes for approx. 5 seconds.

Pyrolytic cleaning then starts.

3 The Light does not work.

When a pre-set temperature is reached, the door is locked.

The bars of the heat indicator light up, until the door is unlocked again.

Changing the length of time for the pyrolytic cleaning

1. Proceed as described in the section “Pyrolytic cleaning”.

2. As long as Duration is flashing, select the desired length for the process using or :

“ / 2:15” or “3:15”

Duration flashes for approx. 5 seconds.

Pyrolytic cleaning then starts.

3 If Duration is no longer flashing, press the Selection button again and then perform the

setting procedure.

Changing the switch-off time for the pyrolytic cleaning

The switch-off timecan be delayed using the clock function End (within 2 minutes of the

pyrolytic cleaning starting).

When the different processes for pyrolytic cleaning are set:

P2 - 2:15 = Pyroluxe menue easy: For a light degree of soiling,

P1 - 3:15 = Pyroluxe menue intensive: For a high degree of soiling.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

No comments

Aeg-Electrolux B5741-5-M User Manual Page 30