Aeg-Electrolux T7042TK User Manual download pdf (Page 31)

Installation

Appliance positioning

• It is recommended that, for your convenience, the machine is positioned close

to your washing machine.

• The tumble dryer must be installed in a clean place, where dirt does not build

up.

• Air must be able to circulate freely all round the appliance. Do not obstruct the

front ventilation grille or the air intake grilles at the back of the machine.

• To keep vibration and noise to a minimum when the dryer is in use, it should be

placed on a firm, level surface.

• Once in its permanent operating position, check that the dryer is absolutely level

with the aid of a spirit level. If it is not, raise or lower the feet until it is.

• The feet must never be removed. Do not restrict the floor clearance through

deeppile carpets, strips of wood or similar. This might cause heat built-up which

would interfere with the operation of the appliance.

The hot air emitted by the tumble dryer can reach temperatures of up to 60°C. The

appliance must therefore not be installed on floors which are not resistant to high

temperatures.

When operating the tumble dryer, the room temperature must not be lower than

+5°C and higher than +35°C, as it may affect the performance of the appliance.

WARNING!

Should the appliance be moved, it must be transported vertically.

WARNING!

The appliance must not be installed behind the lockable door, a sliding door a door

with a hinge on the opposite side to that of the appliance.

Installation

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

No comments

Aeg-Electrolux T7042TK User Manual Page 31