Aeg-Electrolux TCE User Manual download pdf (Page 7)

ENGLISH

Use

The control panel

1Programme guide

This will help you to select the correct programme

for drying.

2Mains-ON light

Comes on when the appliance is switched on

(ON/OFF button pressed down) and goes out when

this button is released.

3 ON/OFF button

This button is used to switch the dryer on. At the

end of the programme, release this button by

pressing it again to switch the dryer off.

4 Low temperature button

Pressing this button allows drying to be performed

at a lower temperature, for delicate items.

The corresponding pilot light comes on.

This option can also be used for time controlled

drying.

The dryer heats at 1300 W instead of 2000 W.

If the button is not pressed, drying is performed at

full power (2000 W).

5 Buzzer OFF button

A buzzer sounds by depressing the pushbuttons,

during the anti-creasing phase, at the end of

programme and when the water reservoir is full.

Press this button when selecting the programme if

you wish to switch the buzzer off during the anti-

creasing phase. The corresponding light illuminates.

6 Start button

Press this button for about 2 seconds to start the

dryer after having selected the programme.

If the door of the appliance or the small door at

the bottom is opened while the programme is

running, this button must be pressed again after

closing the door in order to restart the programme

from the point at which it was interrupted.

This button must be depressed also after a power

failure and after having re-inserted the water

reservoir, if it has been emptied in the middle of a

programme.

In both cases light or (depending on the

phase in progress) flashes to remind you that the

start button needs to be pressed again.

7Programme phase indicator lights

These lights indicate the various phases of the

programme as they are being performed.

“Drying” light

This light indicates that the appliance is in the drying

phase.

“Cooling” light

This light indicates that the appliance is in the

cooling phase. At the end of drying, there is a 10

minute cooling phase to cool the laundry.

If light or is flashing, this means that the

Start button needs to be pressed again for the

programme to resume.

“End of programme” light

This light flashes at the end of the cooling phase

and during the anti-creasing phase.

125993660•gb 31/10/02 09:27 Pagina 7 (Nero/Process Black pellicola)

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Comments to this Manuals

No comments

Aeg-Electrolux TCE User Manual Page 7

Comments to this Manuals

Related products and manuals for Tumble dryers Aeg-Electrolux TCE