Aeg-Electrolux E4001-7-W User Manual download pdf (Page 21)

Shelf Support Rails

Removing the shelf support rails

1. Pull the front of the shelf support rail

away from the side wall.

2. Pull the rear shelf support rail away

from the side wall and remove it.

Installing the shelf support rails

Install the shelf support rails in opposite sequence.

Important! The rounded ends of the shelf support rails must point to the front!

Oven lamp

WARNING!

There is a danger of electrical shock!

Before you change the oven lamp:

• Switch off the oven.

• Remove the fuses in the fuse box or switch off the circuit breaker.

Put a cloth on the bottom of the oven for protection of the oven light and glass cover.

Replacing the oven lamp

1. You can find the lamp glass cover at the back of the cavity.

Turn the lamp glass cover counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the oven lamp with applicable 300°C heat-resistant oven lamp.

Use the same oven lamp type.

4. Install the glass cover.

Care and cleaning

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Aeg-Electrolux E4001-7-W User Manual Page 21