Aeg-Electrolux S72388SK1 User Manual download pdf (Page 17)

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow: Earth

Brown: Live

Blue: Neutral

As the colours of the wires in the mains lead of this appliance may not correspond with

the coloured markings identifying the terminals in your plug, proceed as follows:

1. Connect the wire coloured green and yellow to the terminal marked either with the

letter “E“ or by the earth symbol or coloured green and yellow.

2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or

coloured black.

3. Connect the wire coloured brown to the terminal either marked with the “L“ or coloured

red.

Check that no cut, or stray strands of wire is present and the cord clamp is secure

over the outer sheath.

5. Make sure the electricity supply voltage is the same as that indicated on the appliance

rating plate.

6. Switch on the appliance.

The appliance is supplied with a 13 amp plug fitted . In the event of having to change

the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.

WARNING!

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that

it is disposed of safely.

Removing the transport support

Your appliance is equipped with transport support to secure the door during transportation.

To remove them do these steps:

Installation

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Aeg-Electrolux S72388SK1 User Manual Page 17