Aeg-Electrolux S76488KG User Manual download pdf (Page 8)

Prior to Initial Start–Up

Please clean the appliance interior and all accessories prior to initial

start-up (see section: “Cleaning and Care”).

Standby time

The oil for automatic lubrication contained in the compressor may

flow into the refrigeration circuit if the appliance is transported in an

inclined position. To allow the oil to flow back into the compressor,

wait approximately 2 hours before placing the appliance in operation.

☞

Electrical connection

Before initial start-up, refer to the appliance rating plate to ascertain if sup-

ply voltage and current values correspond with those of the mains at the

installation location.

e.g.: AC 220 ... 240 V 50 Hz or

220 ... 240 V~ 50 Hz

(i.e. 220 to 240 volts alternating current, 50 Hertz)

The rating plate is inside the appliance on the left.

A correctly installed, earthed socket is required for the electrical supply. The

supply must have a fuse rating of at least 10 Amps.

If the socket is not accessible once the appliance is built in, the electrical

installation must include suitable means of isolating the appliance from the

mains (e.g. fuse, cut-out, current trip or similar with a minimum contact sepa-

ration of 3 mm).

Attention: The mains connection cable may only be replaced by a skilled elec-

trician. Please contact your dealer or our customer service department for

repairs.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 79 80

No comments

Aeg-Electrolux S76488KG User Manual Page 8