AEG Electrolux EW 1255 F Operations Instructions download pdf (Page 16)

Interrupting a programme/adding washing

Interrupting a programme

• A washing programme can be interrupted at any time by pressing the

S/P (START/PAUSE) button. It is then re-started by pressing the

S/P (START/PAUSE) button again.

• To stop the washing machine before the programme has ended, turn

the programme knob to O (OFF). Important! Be careful if there is

water in the appliance!

Adding washing

It is possible to add washing, as long as the K (DOOR) light is not lit.

1. Press the S/P (START/PAUSE) button. The door can be opened.

2. Shut door and press the S/P (START/PAUSE) button again. The pro-

gramme continues.

End of the wash programme/Removing the washing

When the programme has finished, E (END) will illuminate in the pro-

gramme progress display. As soon as the K (DOOR) indicator has gone

out and the E (END) indicator is illuminated, the door can be opened.

1. Open the door and remove the washing.

2. Turn the programme knob to O (OFF).

3. Turn off the tap.

4. After the machine has finished washing, pull out the detergent drawer

a little to let it dry out. Keep the door very slightly open so that the

washing machine can air.

If n (RINSE HOLD) was selected:

After a rinse hold K (DOOR) and E (END) will illuminate in the pro-

gramme progress display.

The water must first be drained:

– Either turn the programme selector to O (OFF), then to p (DRAIN)

and press the S/P (START/PAUSE) button (water is drained and

there is no spin cycle),

– or turn the programme selector to O (OFF) and then to C (SPIN). De-

pending on the type of washing, if required reduce the spin speed

and press the S/P (START/PAUSE) button (water is drained and

there is a spin cycle).

Downloaded from www.Manualslib.com manuals search engine

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

No comments

AEG Electrolux EW 1255 F Operations Instructions Page 16