Aeg-Electrolux L12843VIT User Manual download pdf (Page 28)

Use less detergent if:

• you are washing a small load,

• the laundry is lightly soiled,

• large amounts of foam form during washing. For the stain treatment before

the washing cycl, follow the product manufacturers’ instructions on

detergent quantities. If you use any specific product to remove the stains, you

must start the cycle of washing immediately .

Degrees of water hardness

Water hardness is classified in so-called “degrees” of hardness. Information on

hardness of the water in your area can be obtained from the relevant water

supply company, or from your local authority.

Note: A water softener must be added when water has a medium-high degree

of hardness (from degree of hardness II). Follow the manufacturer’s instructions.

The quantity of detergent can then always be adjusted to degree of hardness I (=

soft).

Preparing the drying cycle

As a dryer, the machine works on the condensation principle

Therefore, the water tap must be open and the drain hose must drain

water into a sink or into the drain pipe, even during the drying cycle.

Attention!

Before starting the drying programme, reduce the loads of washed laundry, in

order to obtain good performances.

Laundry not suitable for drying

• Particularly delicate items such as synthetic curtains, woollen and silk, garments

with metal inserts, nylon stockings, bulky garments such as anoraks, bedcovers,

quilts, sleeping bags and duvets must not be machine dried.

Preparing the drying cycle

Level

Characteristic

soft

Degrees of water hardness

GGeerrmmaann

°°ddHH

FFrreenncchh

°°TT..HH..

0-7 0-15

2 medium 8-14 16-25

3 hard 15-21 26-37

4 very hard

> 21 > 37

132962910_EN.qxd 23/07/2008 10.29 Page 28

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

No comments

Aeg-Electrolux L12843VIT User Manual Page 28